LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 696 (Exterior Lighting System -- Excursion & F250-F550 Super Duty) >> Removal And Installation >> Lamp Assembly - Parking Lamp >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: The side marker lamp and parking lamp are one piece. Do not pull on the side marker to pull the assembly out.
  1. Remove the parking lamp assembly.
    1. Remove the parking lamp bolts.
    2. Position the parking lamp assembly so the electrical connectors can be accessed.
    3. Disconnect the electrical connectors.
      Fig 1: Disconnecting Electrical Connectors
      G02777872Courtesy of FORD MOTOR CO.
  2. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals