LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 69 (Engine Controls - Self-Diagnostics - EEC-V - Diesel 7.3L (99F E Series & 99F F450/550)) >> System Tests >> Test FC: Clutch Pedal Position Switch/Neutral Start Switch >> Diagnostic Aids

Diagnostic Aids

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Ford RV Cutaway, 2002 Ford Pickup, 2002 Ford F550 Super Duty, 2002 Ford F450 Super Duty, and 2002 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.

Perform this test when directed by QUICK TEST. This test is only intended to diagnose the following components and circuits:

  1. Clutch Pedal Position Switch

    Is a normally closed switch that detects when clutch pedal is depressed (manual transmissions) to disable speed control system and PTO, and raised-idle mode. CPP switch actuation occurs as clutch is initially depressed prior to disengaging transmission at top of travel.
  2. Neutral Start Switch

    Is a normally closed switch that is used by PCM to enable raised-idle modes and Auxiliary Powertrain Control Module (APCM) functions.
Fig 1: Identifying Clutch Pedal Position Switch Circuits & Terminals (F250-750 With M/T)
G00096682Courtesy of FORD MOTOR CO.
Fig 2: Identifying Neutral Start Switch Circuits & Terminals (F650-750 W/Allison AT545)
G00096683Courtesy of FORD MOTOR CO.