Resetting OBD-II DTCs (New Generation Star Tester)
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Ford RV Cutaway, 2002 Ford Pickup, 2002 Ford F550 Super Duty, 2002 Ford F450 Super Duty, and 2002 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.
To reset OBD-II DTCs, turn ignition off. Ensure test equipment is properly attached. Using NGS tester, perform the following steps:
- Select VEHICLE & ENGINE SELECTION menu.
- Select NEW VEHICLE, YEAR & MODEL.
- Follow operating instructions from scan tool menu.
- Select GENERIC OBD-II FUNCTIONS. Press CONT button if all OBD-II monitors are incomplete.
- Turn ignition on.
- Select CLEAR DIAGNOSTIC CODES.
- Press START key.