LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 689 (Parking Aid System -- Excursion & F250-F550 Super Duty) >> Removal And Installation >> Parking Aid Sensor >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the parking aid sensor and bezel.
    1. Disconnect the electrical connector.
    2. Release the locking tabs on the sensor bezel.
    3. Remove the parking aid sensor and bezel.
      Fig 1: Removing Parking Aid Sensor And Bezel
      G02777693Courtesy of FORD MOTOR CO.
  2. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals