LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 688 (Warning System -- Excursion & F250-F550 Super Duty) >> General Procedures >> Belt Minder Deactivating/Activating >> Preparation

Belt Minder Deactivating/Activating: Preparation

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before deactivating/activating the belt minder, set the parking brake.
  2. Place the gearshift in the P (Park) position.
  3. Place the ignition switch in the OFF position.
  4. Close all the vehicle doors.
  5. Unbuckle the driver safety belt
  6. Place the parklamps/headlamps switch in the OFF position.
scientia non olet · About LEMON Manuals