Safety Belt Warning Chime
WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
The safety belt warning chime warns that the safety belt is not fastened. The safety belt warning chime will sound when the driver safety belt is not fastened and the ignition switch is turned to RUN or START.
The safety belt warning chime will stop sounding when:
- the safety belt is fastened.
- the ignition switch is switched to the OFF/LOCK or ACC position.
- the chime has sounded for 6 seconds.
The safety belt warning chime inputs are:
- ignition switch START position (clutch pedal pressed)
- ignition switch RUN position
- driver safety belt switch
Output is the instrument cluster chime.