Instrument Cluster Diagnostic Trouble Code (DTC) Index
WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
INSTRUMENT CLUSTER DIAGNOSTIC TROUBLE CODE (DTC) INDEX INSTRUMENT CLUSTER DIAGNOSTIC TROUBLE CODE (DTC) INDEX
| DTC | Description | Source | Action |
|---|---|---|---|
| B1201 | Fuel Sender Circuit Failure | Instrument Cluster | Go To PINPOINT TEST B: INCORRECT FUEL GAUGE INDICATION . |
| B1204 | Fuel Sender Circuit Short To Ground | Instrument Cluster | Go To PINPOINT TEST B: INCORRECT FUEL GAUGE INDICATION . |
| B1317 | Battery Voltage High | Instrument Cluster | Go To PINPOINT TEST C: INCORRECT VOLTAGE GAUGE INDICATION-MANUAL TRANSMISSION ONLY . |
| B1318 | Battery Voltage Low | Instrument Cluster | Go To PINPOINT TEST C: INCORRECT VOLTAGE GAUGE INDICATION-MANUAL TRANSMISSION ONLY . |
| B1320 | Driver Door Ajar Circuit Open | Instrument Cluster | Go To PINPOINT TEST J: THE DOOR AJAR INDICATOR IS INOPERATIVE (CHIME IS OPERATIVE)/DOES NOT OPERATE CORRECTLY . |
| B1328 | Passenger Door Ajar Circuit Open | Instrument Cluster | Go To PINPOINT TEST J: THE DOOR AJAR INDICATOR IS INOPERATIVE (CHIME IS OPERATIVE)/DOES NOT OPERATE CORRECTLY . |
| B1342 | ECU is Defective | Instrument Cluster | INSTALL a new instrument cluster. REFER to INSTRUMENT CLUSTER . TEST the system for normal operation. |
| B1360 | Ignition Run/Acc Circuit Open | Instrument Cluster | Go To PINPOINT TEST A: NO COMMUNICATION WITH THE INSTRUMENT CLUSTER . |
| B1463 | Safety Belt Switch Circuit Open | Instrument Cluster | Go To PINPOINT TEST K: THE SAFETY BELT WARNING INDICATOR IS INOPERATIVE (CHIME IS OPERATIVE)/DOES NOT OPERATE CORRECTLY . |
| B2143 | NVM Memory Failure | Instrument | Go To PINPOINT TEST A: NO COMMUNICATION WITH THE INSTRUMENT CLUSTER . |
| Cluster | |||
| B2477 | Instrument Cluster Configuration Failure | Instrument Cluster | CHECK for correct configuration. Refer to MODULE CONFIGURATION . |
| B2658 | Wait To Start Warning Indicator Circuit Open | Instrument Cluster | Go To PINPOINT TEST V: THE WAIT TO START INDICATOR IS NEVER/ALWAYS ON-DIESEL ONLY . |
| B2982 | Park Brake Input Circuit Open | Instrument Cluster | Go To PINPOINT TEST M: THE BRAKE WARNING INDICATOR IS NEVER ON . |
| C1125 | Brake Fluid Level Sensor Input Circuit Fault | Instrument Cluster | Go To PINPOINT TEST M: THE BRAKE WARNING INDICATOR IS NEVER ON . |
| C1284 | Oil Pressure Switch Failure | Instrument Cluster | Go To PINPOINT TEST D: INCORRECT OIL PRESSURE GAUGE INDICATION . |
| U1073 | Invalid or Missing Data for Engine Coolant | Instrument Cluster | Go To PINPOINT TEST E: INCORRECT TEMPERATURE GAUGE INDICATION . |
For a complete list of instrument cluster DTCs, refer to MULTIFUNCTION ELECTRONIC MODULE .