System Airflow Description - Manual Climate Control: Panel

When PANEL is selected:

• The air inlet door vacuum control motor is at no vacuum, admitting only outside air into the passenger compartment.
• The panel/defrost door vacuum control motor is at full vacuum and the panel/floor door vacuum control motor is at no vacuum, directing airflow to the instrument panel A/C registers.
• The temperature can be adjusted to heat the air but the air cannot be cooled below the outside temperature.
• The A/C compressor will not operate.
• The blower motor is on.
• The auxiliary blower motor (if equipped) is enabled. Blended air temperature is available but the air cannot be cooled below the interior vehicle temperature.