Fuel Line Fittings - Hairpin Clip: Connect

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Inspect the fitting and the tube for damage. Remove any dirt or obstructions.
Apply a light coat of clean engine oil to the male tube end.
Insert the hairpin clip into the fitting.

Fig 1: Inserting Hairpin Clip Into Fitting
Courtesy of FORD MOTOR CO.
Align the tube and the fitting.

Fig 2: Aligning Tube And Fitting
Courtesy of FORD MOTOR CO.
Insert the tube in the fitting and push together until a click is heard.

Fig 3: Inserting Tube In Fitting
Courtesy of FORD MOTOR CO.
Pull on the connection to make sure it is fully engaged.

Fig 4: Pulling On Connection
Courtesy of FORD MOTOR CO.