LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 672 (Four-Wheel Drive Systems - Excursion & F250-F550 Super Duty) >> Removal And Installation >> Mode Select Switch (MSS) >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the mode select switch (MSS) knob.
    Fig 1: Removing Mode Select Switch (MSS) Knob
    G02776703Courtesy of FORD MOTOR CO.
  2. Remove the MSS plate.
    Fig 2: Removing MSS Plate
    G02776704Courtesy of FORD MOTOR CO.
  3. Disconnect the wiring harness connector.
    Fig 3: Disconnecting Wiring Harness Connector
    G02776705Courtesy of FORD MOTOR CO.
  4. Remove the two screws and the MSS.
    Fig 4: Removing Screws And MSS
    G02776706Courtesy of FORD MOTOR CO.
  5. To install, reverse the removal procedure.