LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 672 (Four-Wheel Drive Systems - Excursion & F250-F550 Super Duty) >> Removal And Installation >> Hublock Vacuum Reservoir >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the vacuum line connector from the hublock vacuum reservoir.
    Fig 1: Disconnecting Vacuum Line Connector From Hublock Vacuum Reservoir
    G02776712Courtesy of FORD MOTOR CO.
  2. Working through the RH front wheel opening, remove the retaining nuts.
    Fig 2: Removing Retaining Nuts
    G02776713Courtesy of FORD MOTOR CO.
  3. Remove the hublock vacuum reservoir.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals