LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 669 (Clutch System - F250-F550 Super Duty) >> Removal And Installation >> Pilot Bearing >> Installation

Pilot Bearing: Installation

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Never install a used transmission input shaft pilot bearing.
    NOTE: The new transmission input shaft pilot bearing is progressed and does not require additional lubrication.
    Fig 1: Installing Transmission Input Shaft Pilot Bearing
    G02776371Courtesy of FORD MOTOR CO.
  1. Using a soft-face hammer and the special tool, install the new transmission input shaft pilot bearing.
scientia non olet · About LEMON Manuals