Extension Housing Seal: Installation

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Vehicles without a fixed flange

Using the special tool, install the output shaft seal.

Fig 1: Installing Output Shaft Seal
Courtesy of FORD MOTOR CO.

Vehicles with a fixed flange
Using the special tool, install the output shaft seal.

Fig 2: Installing Output Shaft Seal
Courtesy of FORD MOTOR CO.
Using the special tool, install the output shaft nut.

Fig 3: Installing Output Shaft Nut
Courtesy of FORD MOTOR CO.
Install the output shaft flange.
1. Install the output shaft flange.
2. Install a new bolt.
  
  Fig 4: Installing Output Shaft Flange
  Courtesy of FORD MOTOR CO.
All vehicles
Install the driveshaft.