LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 666 (Automatic Transmission - 5R110W - Excursion & F250-F550 Super Duty) >> In-Vehicle Repair >> Extension Housing Seal And Bushing - Slip Yoke >> Removal

Extension Housing Seal And Bushing - Slip Yoke: Removal

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. Refer to JACKING & LIFTING .
  2. Remove the driveshaft. Refer to DRIVESHAFT .
  3. Using the special tools, remove the extension housing seal.
    Fig 1: Removing Extension Housing Seal
    G02775632Courtesy of FORD MOTOR CO.
    4. CAUTION: Do not damage any machined surfaces. Damage can cause the new seal to leak.
    Fig 2: Removing Extension Housing Bushing
    G02775633Courtesy of FORD MOTOR CO.
  4. Using the special tool, remove the extension housing bushing.
scientia non olet · About LEMON Manuals