Section 666 (Automatic Transmission - 5R110W - Excursion & F250-F550 Super Duty): Assembly: Transmission: Material
WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATION
| Item | Specification |
|---|---|
| Motorcraft MERCON® Multi-Purpose (ATF) Transmission Fluid XT-6-QSP | MERCON®SP |
NOTE:
The pressure switches shown in this procedure will not be applicable to all vehicle applications. Some vehicles will not have the pressure switches or the harness installed in the valve body.
NOTE:
Soak all friction clutch plates in clean automatic transmission fluid.
NOTE:
Prior to installation, lightly lubricate all O-ring seals with clean automatic transmission fluid.
NOTE:
Lightly lubricate all thrust washers with petroleum jelly to hold them in place during assembly.