LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 665 (Automatic Transmission - 4R100 - Excursion & F250-F550 Super Duty) >> In-Vehicle Repair >> Transmission Filler Tube >> Installation

Transmission Filler Tube: Installation

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Coat the O-ring at the bottom of the oil filler tube with transmission fluid.
    Fig 1: Installing Oil Filler Tube
    G02774921Courtesy of FORD MOTOR CO.
  1. Install the oil filler tube.
  2. Install the bolt.
    Fig 2: Installing Bolt
    G02774922Courtesy of FORD MOTOR CO.
  3. Lower the vehicle.
  4. Install the fluid level indicator.
    Fig 3: Installing Fluid Level Indicator
    G02774923Courtesy of FORD MOTOR CO.