LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 656 (Fuel System & Engine Controls - 5.4L (2V) - Excursion & F250-F350 Super Duty) >> Removal And Installation >> Pressure Relief Valve >> Installation

Pressure Relief Valve: Installation

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the pressure relief valve and tighten.
    Fig 1: Installing Pressure Relief Valve
    G02773085Courtesy of FORD MOTOR CO.
  2. Connect the battery ground cable.
  3. Perform the post-service procedures. Refer to FUEL SYSTEM-GENERAL INFORMATION - GASOLINE & DIESEL .
scientia non olet · About LEMON Manuals