LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 655 (Engine Cooling System - Excursion & F250-F550 Super Duty) >> Specifications >> Torque Specifications

Torque Specifications

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Description Nm lb-ft lb-in
Coolant bypass tube mounting bolt 9 - 80
Coolant pump pulley mounting bolts 25 18 -
Fan blade-to-fan clutch mounting bolts 17 13 -
Fan clutch hub-to-coolant pump 133 98 -
Radiator mounting brackets retaining bolts 30 22 -
Coolant temperature indicator sender unit 20 15 -
AC compressor support bracket mounting bolts 47 35 -
AC compressor support bracket mounting nuts 25 18 -
Cylinder drain plug 20 15 -
Transmission cooler tube nuts (3/8 inch tubes) 27 20 -
Transmission cooler tube nuts (1/2 inch tubes) 40 30 -
Degas bottle bolts - 6.0L 10 - 89
Fan shroud-to-radiator bolts 9 - 80
Fan shroud self-tapping screws 3 - 27
Oil cooler center bolt 55 40 -
Oil filter 15 11 -
Degas bottle bolts 9 - 80
Radiator support bracket bolts 30 22 -
Coolant outlet connection 25 18 -
Coolant pump 25 18 -
Coolant pump pulley - 6.0L 31 23 -
Fan clutch hub to coolant pump - 6.0L 133 98 -
Coolant pump mounting - 6.0L 23 17 -
Cooling fan stator - 6.0L 40 30 -
Charge air cooler duct clamps (metal duct) 12 9 -
Charge air cooler duct clamps (blow molded duct) 8 - 71