LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 655 (Engine Cooling System - Excursion & F250-F550 Super Duty) >> Removal And Installation >> Cooling Fan Stator - 6.0L Diesel >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the cooling fan. Refer to COOLING FAN - 6.0L DIESEL .
    2. NOTE: Early build will have five bolts. Late build will have four bolts.
    Fig 1: Removing Bolts Of Cooling Fan Stator
    G02773032Courtesy of FORD MOTOR CO.
  2. Remove the bolts and cooling fan stator.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals