LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 654 (Engine - 6.8L - Excursion & F250-F550 Super Duty) >> In-Vehicle Repair >> Exhaust Manifold - LH >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. Refer to JACKING & LIFTING .
  2. Remove the air cleaner outlet tube. Refer to INTAKE AIR DISTRIBUTION & FILTERING .
  3. Remove the nuts.
    Fig 1: Identifying Loosening Torque Of Exhaust Manifold - LH Nuts
    G02771315Courtesy of FORD MOTOR CO.
  4. Remove the left front wheel and tire. Refer to WHEELS & TIRES .
  5. Remove the left front inner fender well.
  6. Remove the nuts, the exhaust manifold and the gasket.
    • Discard the exhaust manifold gasket.
      Fig 2: Identifying Removal Sequence Of Exhaust Manifold - LH Nuts
      G02771316Courtesy of FORD MOTOR CO.
  7. Clean and inspect the exhaust manifold. Refer to ENGINE SYSTEM - GENERAL INFORMATION .
  8. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals