LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 653 (Engine - 5.4L (2V) - Excursion & F250-F350 Super Duty) >> In-Vehicle Repair >> Flexplate - Automated Equipment >> Installation

Flexplate - Automated Equipment: Installation

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the flexplate and loosely install the bolts. Tighten the bolts in sequence shown.
    Fig 1: Tightening Bolts In Sequence
    G02770777Courtesy of FORD MOTOR CO.
  2. Install the transmission. Refer to AUTOMATIC TRANSMISSION - 4R100 .
scientia non olet · About LEMON Manuals