LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 653 (Engine - 5.4L (2V) - Excursion & F250-F350 Super Duty) >> In-Vehicle Repair >> Crankshaft Front Seal >> Removal

Crankshaft Front Seal: Removal

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the crankshaft pulley. Refer to CRANKSHAFT PULLEY .
  2. Using the special tool, remove the crankshaft front seal.
    Fig 1: Removing Crankshaft Front Seal Using Special Tool
    G02770540Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals