LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 653 (Engine - 5.4L (2V) - Excursion & F250-F350 Super Duty) >> In-Vehicle Repair >> Camshaft Roller Follower >> Installation

Camshaft Roller Follower: Installation

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the camshaft roller followers.
    1. Install the special tool.
    2. Compress the valve springs.
    3. Install the camshaft roller followers in their original locations.
      Fig 1: Installing Camshaft Roller Followers In Locations
      G02770605Courtesy of FORD MOTOR CO.
  2. Remove the special tool.
    Fig 2: Removing Special Tool
    G02770606Courtesy of FORD MOTOR CO.
  3. Install the cooling fan. Refer to ENGINE COOLING .
  4. Install the valve covers. Refer to VALVE COVER LH , or VALVE COVER RH .
scientia non olet · About LEMON Manuals