LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 652 (Engine System - General Information - Excursion & F250-F550 Super Duty (Gasoline)) >> General Procedures >> Valve - Guide Inner Diameter

Valve - Guide Inner Diameter

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure the inner diameter of the valve guides in two directions where indicated.
    Fig 1: Measuring Inner Diameter Of Valve Guides
    G02770393Courtesy of FORD MOTOR CO.
  2. If the valve guide is not within specifications, ream the valve guide and install a valve with an oversize stem or remove the valve guide and install a new valve guide.
scientia non olet · About LEMON Manuals