LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 652 (Engine System - General Information - Excursion & F250-F550 Super Duty (Gasoline)) >> General Procedures >> Piston - Pin Diameter

Piston - Pin Diameter

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure the piston pin diameter in two directions at the points shown. Verify the diameter is within specification.
    • If out of specification, install new components as necessary.
      Fig 1: Measuring Piston - Pin Diameter
      G02770375Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals