LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 652 (Engine System - General Information - Excursion & F250-F550 Super Duty (Gasoline)) >> General Procedures >> Camshaft Lobe Lift

Camshaft Lobe Lift

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Special Tool(s) 

Fig 1: Identifying Special Tool(s)
G02770350Courtesy of FORD MOTOR CO.
  1. Use a Dial Indicator Gauge with Holding Fixture to measure camshaft intake/exhaust lobe lift.
    • Rotate the camshaft and subtract the lowest indicator reading from the highest indicator reading to figure the camshaft lobe lift.
      • Fig 2: Measuring Camshaft Intake/Exhaust Lobe Lift Using Special Tool
      G02770351Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals