LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 649 (Steering Linkage -- Excursion & F250-F550 Super Duty) >> Removal And Installation >> Damper - F-250, F-350, 4x4, and F-450, F-550 >> Removal

Damper - F-250, F-350, 4x4, and F-450, F-550: Removal

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The procedure for the Super Duty F-250, F-350 4x2 steering damper is similar.
  1. Position and lock the wheels in the straight-forward position. Raise and support the vehicle; Refer to JACKING & LIFTING .
  2. Remove the bolt and nut.
    Fig 1: Locating Bolt
    G02770082Courtesy of FORD MOTOR CO.
  3. Remove the bolt and nut. Remove the damper.
    Fig 2: Removing Bolt And Nut
    G02770083Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals