LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 648 (Power Steering System -- Excursion & F250-F550 Super Duty) >> Removal And Installation >> Hose >> Installation

Removal And Installation: Hose: Installation

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: While repairing the power steering system, care should be taken to prevent the entry of contaminants or premature failure of the power steering components can result.
    NOTE: When connecting a fitting with a Teflon® seal, a new seal must be installed.
    Fig 1: Installing Teflon Seal Over A Fitting
    G02769992Courtesy of FORD MOTOR CO.
  1. Using the special tool, install a Teflon® seal over a fitting.