Front Drive Axle
WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
The Dana model 50 and model 60 front drive axles feature the following:
- a hypoid gear design with the centerline of the pinion set below the centerline of the ring gear
- a conventional differential case (4204)
- full-floating axle shafts
- a cast center section with two steel tubes
- a stamped differential housing cover (4033)