LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Starting System - Excursion & F250-F550 Super Duty) >> Removal & Installation >> Starter Motor Solenoid Relay - Pickup Chassis >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2002 Ford Pickup, 2002 Ford F550 Super Duty, 2002 Ford F450 Super Duty, 2002 Ford Excursion, and 2002 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable. Remove relay cover. Remove engine control sensor wiring. Remove nuts and cables. Remove starter motor solenoid relay switch bolts and switch.
  2. To install, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals