LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Starting System - Excursion & F250-F550 Super Duty) >> Removal & Installation >> Clutch Pedal Position (CPP) Switch

Clutch Pedal Position (CPP) Switch

WARNING: This page is about a different car, the 2002 Ford Pickup, 2002 Ford F550 Super Duty, 2002 Ford F450 Super Duty, 2002 Ford Excursion, and 2002 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect batter ground cable. Disconnect CPP switch electrical connector. Pull down on CPP switch retaining clip and slide CPP switch toward driver seat. Remove plastic retainer on top of CPP switch by pushing locking tabs together and sliding retainer forward. Remove CPP switch from clutch pedal rod and remove CPP switch. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals