LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Starting System - Excursion & F250-F550 Super Duty) >> Adjustments >> Digital Transmission Range Sensor

Digital Transmission Range Sensor

WARNING: This page is about a different car, the 2002 Ford Pickup, 2002 Ford F550 Super Duty, 2002 Ford F450 Super Duty, 2002 Ford Excursion, and 2002 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support vehicle. Disconnect manual shift control cable from Digital Transmission Range (DTR) sensor control lever. Disconnect DTR sensor harness connector. Place DTR sensor control lever in Neutral. Loosen DTR sensor bolts.
  2. Using DTR Sensor Alignment Tool (T97L-70010-A), align DTR sensor slots. Tighten DTR sensor bolts to specification. See TORQUE SPECIFICATIONS . Place DTR sensor control lever in Overdrive and connect shift lever control cable. Connect DTR harness connector.
scientia non olet · About LEMON Manuals