LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 638 (Driveline System - General Information -- Excursion & F250-F550 Super Duty) >> Diagnosis And Testing >> Driveline System >> Analysis of Leakage >> Wheel Hub Oil Seals

Wheel Hub Oil Seals

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Wheel hub oil seals are susceptible to the same kinds of damage as axle drive pinion seals if installed incorrectly. The seal bore must be clean and the lip handled carefully to avoid cutting or tearing it. Spindle journal surface must be free of nicks, gouges, and rough surface texture. For additional information on wheel hub oil seals, refer to WHEEL HUBS & BEARINGS - FULL FLOATING AXLE - or WHEEL HUBS & BEARINGS - FULL FLOATING AXLE - .

scientia non olet · About LEMON Manuals