LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 633 (Safety Belt System) >> Removal And Installation >> Safety Belt Buckle - Detachable Anchor >> Installation

Safety Belt Buckle - Detachable Anchor: Installation

WARNING: This page is about a different car, the 2004 Ford RV Cutaway, 2004 Ford Econoline, 2004 Ford E450 Super Duty, and 2004 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Make sure to tighten bolts to specification.
    Fig 1: Installing Detachable Safety Belt Anchor Buckle End (1 Of 2)
    G02767538Courtesy of FORD MOTOR CO.
    Fig 2: Installing Detachable Safety Belt Anchor Buckle End (2 Of 2)
    G02767539Courtesy of FORD MOTOR CO.
  1. To install, reverse the removal procedure.
  2. Check the active restraint system for correct operation.