LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 633 (Safety Belt System) >> Removal And Installation >> Safety Belt - Rear 4-Passenger Bench Seat >> Removal

Safety Belt - Rear 4-Passenger Bench Seat: Removal

WARNING: This page is about a different car, the 2004 Ford RV Cutaway, 2004 Ford Econoline, 2004 Ford E450 Super Duty, and 2004 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use the Safety Belt Bolt Torx Bit to remove the LH rear safety belt and buckle bolt.
    Fig 1: Removing LH Rear Safety Belt And Buckle Bolt
    G02767521Courtesy of FORD MOTOR CO.
  2. Remove the LH rear safety belt and buckles.
    Fig 2: Removing LH Rear Safety Belt And Buckles
    G02767522Courtesy of FORD MOTOR CO.
  3. Use the Safety Belt Bolt Torx Bit to remove the safety belt and tongue bolt.
    Fig 3: Removing Safety Belt And Tongue Bolt
    G02767523Courtesy of FORD MOTOR CO.
  4. Remove the safety belt and tongue.
    Fig 4: Removing Safety Belt And Tongue
    G02767524Courtesy of FORD MOTOR CO.
  5. Use the Safety Belt Bolt Torx Bit to remove the RH rear safety belt and buckle bolt.
    Fig 5: Removing RH Rear Safety Belt And Buckle Bolt
    G02767525Courtesy of FORD MOTOR CO.
  6. Remove the RH rear safety belt and buckle.
    Fig 6: Removing RH Rear Safety Belt And Buckle
    G02767526Courtesy of FORD MOTOR CO.