LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 633 (Safety Belt System) >> Removal And Installation >> Safety Belt - Rear 3-Passenger Bench Seat >> Removal

Safety Belt - Rear 3-Passenger Bench Seat: Removal

WARNING: This page is about a different car, the 2004 Ford RV Cutaway, 2004 Ford Econoline, 2004 Ford E450 Super Duty, and 2004 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use the Safety Belt Bolt Torx Bit to remove the LH rear bolt and safety belt buckle.
    Fig 1: Removing LH Rear Bolt And Safety Belt Buckle
    G02767514Courtesy of FORD MOTOR CO.
  2. Remove the LH rear safety belt buckle assembly.
    Fig 2: Removing LH Rear Safety Belt Buckle Assembly
    G02767515Courtesy of FORD MOTOR CO.
  3. Use the Safety Belt Bolt Torx Bit to remove the RH rear safety belt and buckle bolt.
    Fig 3: Removing RH Rear Safety Belt And Buckle Bolt
    G02767516Courtesy of FORD MOTOR CO.
  4. Remove the RH rear safety belt buckle and tongue assembly.
    Fig 4: Removing RH Rear Safety Belt Buckle And Tongue Assembly
    G02767517Courtesy of FORD MOTOR CO.