LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 633 (Safety Belt System) >> Removal And Installation >> Height Adjuster - Shoulder Safety Belt >> Installation

Height Adjuster - Shoulder Safety Belt: Installation

WARNING: This page is about a different car, the 2004 Ford RV Cutaway, 2004 Ford Econoline, 2004 Ford E450 Super Duty, and 2004 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Make sure the safety belt webbing is not twisted prior to installation.
    NOTE: Make sure to tighten bolts to specification.
    NOTE: Inspect the shoulder safety belt guide cover for damage. If the shoulder safety belt guide cover is damaged or if it does not remain closed, install a new shoulder safety belt guide.
    Fig 1: Checking Active Restraint System For Correct Operation (1 Of 2)
    G02767511Courtesy of FORD MOTOR CO.
    Fig 2: Checking Active Restraint System For Correct Operation (2 Of 2)
    G02767512Courtesy of FORD MOTOR CO.
  1. Follow the removal procedure in reverse order.
    • Check the active restraint system for correct operation.