LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 633 (Safety Belt System) >> Diagnosis And Testing >> Safety Belt System >> Inspection and Verification

Inspection and Verification

WARNING: This page is about a different car, the 2004 Ford RV Cutaway, 2004 Ford Econoline, 2004 Ford E450 Super Duty, and 2004 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern by operating the safety belt.
  2. Visually inspect for obvious signs of mechanical and electrical damage. Refer to the following chart.
    Fig 1: Visual Inspection Chart
    G02767472Courtesy of FORD MOTOR CO.
  3. If the fault is not visually evident, determine the symptom. GO to SYMPTOM CHART