LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 633 (Safety Belt System) >> Diagnosis And Testing >> Component Test - Safety Belt Functional Test >> Automatic Locking Retractor (ALR) Mode

Automatic Locking Retractor (ALR) Mode

WARNING: This page is about a different car, the 2004 Ford RV Cutaway, 2004 Ford Econoline, 2004 Ford E450 Super Duty, and 2004 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fully extract the safety belt webbing from the retractor.
  2. Allow the webbing to retract onto the spool. An audible clicking sound should be heard and the safety belt webbing should not be free to move out of the retractor.
  3. Allow the webbing to retract fully onto the spool. The webbing should now be free to move in or out of the spool without an audible clicking sound.
  4. If the safety belt does not operate as indicated in the previous steps, the safety belt must be repaired.
scientia non olet · About LEMON Manuals