LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 631 (Wiper System And Washer System) >> Removal And Installation >> Mounting Arm and Pivot Shaft >> Installation

Mounting Arm and Pivot Shaft: Installation

WARNING: This page is about a different car, the 2004 Ford RV Cutaway, 2004 Ford Econoline, 2004 Ford E450 Super Duty, and 2004 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
    Fig 1: Tightening Bolts With Torque Specification
    G02767452Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals