LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 631 (Wiper System And Washer System) >> General Procedures >> Wiper Blade and Pivot Arm Adjustment

Wiper Blade and Pivot Arm Adjustment

WARNING: This page is about a different car, the 2004 Ford RV Cutaway, 2004 Ford Econoline, 2004 Ford E450 Super Duty, and 2004 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Cycle and park the windshield wipers.
  2. Verify that the distance between the center of the RH windshield wiper blade (17528) and the cowl top vent panel is within specification.
    Fig 1: Identifying Distance Between Center Of RH Windshield Wiper Blade And Cowl Top Vent Panel
    G02767446Courtesy of FORD MOTOR CO.
  3. Verify that the distance between the center of the LH windshield wiper blade and the cowl top vent panel is within specification.
    Fig 2: Identifying Distance Between Center Of LH Windshield Wiper Blade And Cowl Top Vent Panel
    G02767447Courtesy of FORD MOTOR CO.
  4. If the distance is not within specification, remove the windshield wiper pivot arm (17526) that is not within specification and reposition it to specification; refer to PIVOT ARM 
scientia non olet · About LEMON Manuals