LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 606 (Fuel Tank & Fuel Lines - Natural Gas) >> Removal And Installation >> Solenoid Valve - Fuel Tank >> Removal

Solenoid Valve - Fuel Tank: Removal

WARNING: This page is about a different car, the 2004 Ford RV Cutaway, 2004 Ford Econoline, 2004 Ford E450 Super Duty, and 2004 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fuel tank(s). For additional information, refer to FUEL TANK - MIDSHIP , FUEL TANK - AFT-AXLE ASSEMBLY , FUEL TANK - FORWARD AFT-AXLE , FUEL TANK - EXTENDED RANGE  or FUEL TANK - REAR AFT-AXLE .
    2. CAUTION: When removing the fuel tank solenoid valve electrical connector, it is possible for the connector pins to disengage from the solenoid valve.
    Fig 1: Removing Fuel Tank Solenoid Valve Electrical Connector
    G02766140Courtesy of FORD MOTOR CO.
  2. Remove the fuel tank solenoid valve electrical connector.
    1. Remove the retaining screws.
    2. Remove the fuel tank solenoid valve electrical connector.
  3. Remove the fuel tank solenoid valve.
    Fig 2: Removing Fuel Tank Solenoid Valve
    G02766141Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals