LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 604 (Fuel System-General Information-Gasoline & Diesel) >> General Procedures >> Push Connect Fittings >> Connect

Push Connect Fittings: Connect

WARNING: This page is about a different car, the 2004 Ford RV Cutaway, 2004 Ford Econoline, 2004 Ford E450 Super Duty, and 2004 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Lubricate the tube end with clean engine oil to ease assembly.
    Fig 1: Pushing Tube Into Fitting
    G02765974Courtesy of FORD MOTOR CO.
  1. Align and push the tube into the fitting until you hear a click.
  2. Pull on the fitting to make sure it is fully engaged, then install safety clip.
    Fig 2: Pulling On Fitting
    G02765975Courtesy of FORD MOTOR CO.