LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 600 (Automatic Transmission - 4R70W/4R75W) >> Disassembly And Assembly Of Subassemblies >> Intermediate One-Way Clutch >> Disassembly

Intermediate One-Way Clutch: Disassembly

WARNING: This page is about a different car, the 2004 Ford RV Cutaway, 2004 Ford Econoline, and 2004 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: One tab that locks the reverse clutch drum into the reverse sun shell may be removed. This is done for balancing purposes.
    Fig 1: Removing Intermediate One-Way Clutch
    G02765670Courtesy of FORD MOTOR CO.
  1. Remove the intermediate one-way clutch.
    1. Remove the snap ring.
    2. Remove the intermediate one-way clutch.