LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 600 (Automatic Transmission - 4R70W/4R75W) >> Disassembly And Assembly Of Subassemblies >> Intermediate One-Way Clutch >> Assembly

Intermediate One-Way Clutch: Assembly

WARNING: This page is about a different car, the 2004 Ford RV Cutaway, 2004 Ford Econoline, and 2004 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: The intermediate one-way clutch must rotate counterclockwise when installed on the reverse clutch drum and will make a ratchet sound.
    Fig 1: Installing Snap Ring
    G02765671Courtesy of FORD MOTOR CO.
  1. Install the intermediate one-way clutch.
    1. Install the intermediate one-way clutch.
    2. Install the snap ring.
scientia non olet · About LEMON Manuals