LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Suspension - Front) >> Removal & Installation >> Control Arm >> Removal (1998)

Removal (1998)

WARNING: This page is about a different car, the 1999 Mercury Mystique, 1999 Mercury Cougar, 1999 Ford Contour, 1998 Mercury Mystique, and 1998 Ford Contour. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative battery cable. Raise and support vehicle. Remove wheel assembly. Remove pinch bolt attaching ball joint to steering knuckle. Separate ball joint from steering knuckle. DO NOT damage ball joint seal. Remove 4 nuts and bolts attaching control arm to subframe, and remove control arm.

scientia non olet · About LEMON Manuals