Coil Spring & Strut Assembly: Reassembly
WARNING: This page is about a different car, the 1999 Mercury Mystique, 1999 Mercury Cougar, 1999 Ford Contour, 1998 Mercury Mystique, and 1998 Ford Contour. However, it is still accessible from the selected car via links, so may be relevant.
To reassemble, reverse disassembly procedure. Ensure edge of coil spring is aligned with stepped part of spring seat. Ensure upper and lower strut rod bushings are installed in correct locations. See Figure. Tighten thrust bearing retaining nut to specification before releasing spring compressor. See TORQUE SPECIFICATIONS . Remove spring compressor.