Torque Specifications
WARNING: This page is about a different car, the 2004 Ford Econoline, 2004 Ford E450 Super Duty, and 2004 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Center support feed bolts (two rear) | 16 | 12 | - |
| Center support feed bolts (front) | 16 | 12 | - |
| Cooler bypass valve fitting-to-case | 27 | 20 | - |
| Cooler line tube nut to cooler bypass valve fitting | 27 | 20 | - |
| Connector - radiator nipple | 27 | 20 | - |
| Auxiliary cooler tube | 13 | 10 | - |
| Auxiliary cooler tube | 26 | 19 | - |
| Control assembly-to-pump body bolts | 28 | 21 | - |
| Torque converter drain plug | 26 | 19 | - |
| Flexplate inspection cover bolts | 20 | 15 | - |
| Extension housing-to-case bolts | 47 | 35 | - |
| Transmission insulator and retainer-to-case bolts | 95 | 70 | - |
| Transmission insulator and retainer-to-crossmember nuts | 90 | 66 | - |
| Torque converter-to-flexplate | 35 | 26 | - |
| Transmission heat shield | 10 | - | 89 |
| Manual valve detent lever inner nut | 47 | 35 | - |
| Manual valve detent lever spring | 10 | - | 89 |
| Low/reverse OWC inner race-to-case | 28 | 21 | - |
| Line pressure-to-case plug | 12 | 9 | - |
| Main and lower control body-to-case | 10 | - | 89 |
| Main accumulator solenoid body-to-case | 10 | - | 89 |
| Digital transmission TR sensor | 10 | - | 89 |
| Intermediate/overdrive cylinder fluid feed bolts | 16 | 12 | - |
| Transmission pan | 15 | 11 | - |
| Transmission pan drain plug | 26 | 19 | - |
| Pump body-to-case | 28 | 21 | - |
| Parking rod guide plate bolts | 25 | 18 | - |
| Parking pawl abutment | 25 | 18 | - |
| Reinforcing plate-to-case bolts | 10 | - | 89 |
| Stator support-to-pump body bolts | 27 | 20 | - |
| Transmission-to-engine bolts | 61 | 45 | - |
| Transmission support crossmember-to-frame | 95 | 70 | - |
| Transmission support crossmember-to-frame | 90 | 66 | - |
| Output shaft speed (OSS) sensor bolt | 9 | - | 80 |
| Turbine shaft speed (TSS) sensor bolt | 9 | - | 80 |
| Transmission filler tube bracket-to-case (6.8L) | 61 | 45 | - |
| Transmission filler tube bracket-to-cylinder head (5.4L) | 12 | 9 | - |