Check Axial End Play
WARNING: This page is about a different car, the 2004 Ford RV Cutaway, 2004 Ford Econoline, and 2004 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Position the dial indicator on the turbine end of the radial shaft and zero the indicator.
- Move the radial shaft back and forth by hand and record the reading.
- If readings exceed specifications, install a new CHRA . Refer to Turbocharger Reconditioning .
NOTE:
Radial shaft movement cannot readily be measured on this turbocharger.