Oil Pump: Installation

WARNING: This page is about a different car, the 2004 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.

Clean and inspect the mating surfaces.
Position the oil pump, and install the bolts loosely. Tighten the bolts in the sequence shown.

Fig 1: Inspecting Mating Surfaces
Courtesy of FORD MOTOR CO.

CAUTION: The oil pump must be primed prior to starting the engine.

Install the oil pan. For additional information, refer to OIL PAN .
Install the crankshaft sprocket. For additional information, refer to TIMING DRIVE COMPONENTS - WINDSOR ENGINE (5.4L) or TIMING DRIVE COMPONENTS - ROMEO ENGINE (4.6L) .